·Rational whole structure, high containerization, effectively reduce the frequency of transport
·Use heavy-load 10×8-drive special chassis. Adopt hydraulic power steering. The workover rig has high trafficability and high cross-country performance.
·The emission meets China 5 standard. It is environmental friendly.
·The main brake can adopt band brake or hydraulic disk brake. The auxiliary brake adopts pneumatic water-cooling disk brake or pneumatic tong brake.
·The table drive box has forward and reverse gears so as to adapt to various operations of drill pipe and rotation. The torque release gear can guarantee safe release of deformation of the drill pipe.
·The derrick has front open and is a binodal suit FC mast-type derrick. It raises, stretches out and draws back by hydraulic pressure.
·Racking platform has many structure types. The components can open automatically. No overhead installation needed.
Grouting system, pressure measuring system, standby drilling line coil and conductor rope system can be equipped as required.
The main engine adopts high-strength steel and new-type materials. The unladen mass is only 47.5t.
·The drill floor takes eight-upright flexible structure so it is easy to make overall transportation and hoisting.
·Excellent solid control, well control, high-pressure manifold system, pump sets, drilling and workover tools, duty room, camping house and other facilities which can meet different users’ requirements.
·Uphold “people first” design concept. Intensify safety protection and detection measures.
Item |
Parameter |
Workover depth |
27/8″oil pipe 7000m |
Overhaul depth |
27/8″drill pipe 4500m |
Maximum load of the hook |
1100kN |
Rated load of the hook |
800kN |
Installed power |
485HP |
Derrick height |
33m |
Hook speed |
0-1.4m/s |
Traveling system |
5×4 |
Main drilling line diameter |
φ26mm |
Driving Type |
10×8 |
Travelling speed |
60km/h(Limit: 45km/h) |
Approach angle / departure angle |
26°/13° |
Minimum ground clearance |
310mm |
Maximum gradeability |
30% |
Shifting and transporting boundary dimension |
19.6 m×3.05 m×4.12m |
Product configurations
Item |
Standard configuration |
Optional configuration |
Motor |
ISX15E5 485 |
Weichai WP13.500E50 |
Gearbox |
Allison M5620AR |
Kaistar BY602 |
Winch |
Single-cylinder |
Double-cylinder |
Master rotor brake |
Hydraulic disk brake |
Brand brake |
Auxiliary brake |
48-inch air-cooling tongs |
Water-cooling disk brake 224 |
Driller operation |
Driller console |
Driller room |
Drill floor height |
4.5m |
3.7m |